Original Screen Tight
What tools can you use to cut a Screen Tight cap?
You can use garden shears, preferably the bypass style. Mark both sides of the cut to align the blade side to the legs of the cap. You can also use a chop saw, but you will need to place a piece of wood beside the cap when you cut to prevent the ...
Can I install wood lattice instead of the PVC Screen Tight cap?
Yes, you can install stained or painted wood lattice using nails or fasteners of your choosing. If you are wanting black caps, this is the preferred method to achieve that look.
Are the Screen Tight caps available in black?
Our caps are not available in black due to the nature of PVC materials and how dark pigments react to the sun’s UV rays over time. If you would like a black cap, you can paint wood lattice and install over the screen tight base. Our aluminum systems, ...
Can Screen Tight caps be painted?
Our caps can be painted. The caps needed to be cleaned with denatured alcohol and painted with a latex paint. We don't recommend dark colors as the UV rays can be harsh on vinyl.
How to Install Original Screen Tight
The PDF installation guide is linked below. You can also visit our installation page or watch this quick installation video to get started.
Does Screen Tight come in longer lengths?
Although standard lengths for Screen Tight cap and base is 8 feet, the 1.5 inch cap is available in 12 foot lengths and the 3.5 inch wide cap comes in 10 foot lengths. Since the base is covered by cap, the joints will not be seen and 8 foot lengths ...
How many screws do I need to install Screen Tight?
You will need about 12 screws per 8 foot length. Add a screw 2 inches from each end and in each pre-punched slot. The screen will pull very tight so it’s important to put a screw in each of the pre-punched slots so that the base is securely attached ...
Can I remove the Screen Tight cap once installed?
Simply use a flat head screwdriver to pry the cap off at the end. Once it is pulled up you can remove the rest with your hand. This is a huge advantage over using lattice and staples as it’s simple and easy and doesn’t rip your screen.
How much does Screen Tight cost?
The system costs about $2 per square foot for all the materials, including the Screen Tight components, fiberglass screen, rubber spline and screws. You will also need a spline-roller tool like our Rollerknife, a drill and pruning shears for cutting.
Can I mount Screen Tight on the inside of the porch?
Yes. Screen Tight and MeshGuard can mount two ways — facing the interior or exterior of your porch. Here is a photo of Screen Tight mounted facing inward to give you an idea of how it looks: Screen Tight Mounted Inside